English 繁中
  • Home
  • Products > Full AutomaticTerminal Crimping Machine > Full Automatic Terminal Crimping Machine (Twin Heade)

CLN-05 Full Automatic Terminal Crimping Machine (Twin Heade)

  • CLN-05
  • Product Feature

    1. Touch screen operations display. The wire strip length can be adjusted on the main control panel.
    2. The wire length quantity and number of lots can be set, and cut depth and strip length can be adjusted with 8 axle centers.
    3. The crimping seat can be adjusted on the touch screen.
    4. Fast manual tension adjustment with micro knob (in cells of 0.02mm) without any tool.
    5. The 100 sets of memory files can be saved or retrieved for required actions.
    6. The design has the wire feeder pipe to go forward again only then goes feed wire the function, the going feed wire is stable.

  • Product Specifications
    Capacity Cutting wire, stripping on one end, stripping both ends, half-stripping on one end, half-stripping both ends, crimping on one end, crimping both ends
    Power source AC 220V /380V 50 /60 Hz 3 phases
    Operation method Manual, single cycle and auto (Continuous)
    Speed 3800 pcs-hr(300 mm)
    Cut length of wire PVC length 30 mm~9,999 mm(Standard)
    Cutting accuracy Variation within 1 mm plus 0.2%
    Stripping length NO.1 Cripping side 0 mm~ 4 mm、NO.2 Cripping side 0 mm~ 7 mm
    Stripping depth 100 action 2 mm (1 action = 0.02 mm)
    Wire size AWG#24~AWG#34(Standard)
    Air pressure 5~6 kg
    Crimping force 1.8 Ton (Servo motor Terminal crimping machine)
    Detectors equipped Wire overload, wire load, terminal overload, terminal load, crimp miss, air presser low, Wire joint
    Dimensions 1,450L*1,100W*1,900H mm
    Weight Approx.450kgs
Prev Next
Back to list