1. Variable stripping lengths: Touch screen operations display. The wire strip length can be adjusted on the main control panel.
2. Servo motor control system to complete fixed-inch, wire cutting, stripping, crimping terminals, semi-stripping soldering and other actions, the action will automatically match the relevant time adjustment.
3. Operating method: Manual, single cycle and Auto (Continuous).
4. Design detection device, an exception can be automatically shut down, and the detected position of the display on the control panel, convenient and fast rule out conditions to minimize downtime.
5. Crimping adjust the position using the touch panel crimping position.
6. Fast manual tension adjustment with micro knob (in cells of 0.02mm) without any tool.
7. Wire twist is made possible by 3 rotary claws driven by motors. Adjustable rotation speeds help change tension of the twisted wires and keep them straight and neat.
8. The quasi-90° tin dipping angle of the machine provides even tin dipping to the wire (in precise dipping depths).
9. With the wire holding position and the tin-dipping tip adjustable to 10 mm, this machine keeps the tin dipping end of the wire from curving, assuring precise dipping positions.
10. An automatic wiper is provided to remove tin chips from tin bath.
11. Design with automatic fill function, the position of the wire-stick tin is more accurate.
12. The 100 sets of memory files can be saved or retrieved for required actions.
