Home
Products > > Full Automatic Crimping Soldering Machine(Twin Heade)

CL-02-DCH Full Automatic Crimping Soldering Machine(Twin Heade)

Product Feature
- Variable stripping lengths: Touch screen operations display. The wire strip length can be adjusted on the main control panel.
- Servo motor control system to complete fixed-inch, wire cutting, stripping, crimping terminals, semi-stripping soldering and other actions, the action will automatically match the relevant time adjustment.
- Operating method: Manual, single cycle and Auto (Continuous).
- Design detection device, an exception can be automatically shut down, and the detected position of the display on the control panel, convenient and fast rule out conditions to minimize downtime.
- Wire twist is made possible by 3 rotary claws driven by motors. Adjustable rotation speeds help change tension of the twisted wires and keep them straight and neat.
- The quasi-90° tin dipping angle of the machine provides even tin dipping to the wire (in precise dipping depths).
- With the wire holding position and the tin-dipping tip adjustable to 6 mm, this machine keeps the tin dipping end of the wire from curving, assuring precise dipping positions.
- An automatic wiper is provided to remove tin chips from tin bath.
- The 100 sets of memory files can be saved or retrieved for required actions.

Product Specifications

Power supply	AC 220 / 380V　50 / 60 HZ　3 phases
Wire size	AWG# 20~30 (Wire OD 2.5 ~ 0.5mm)
Air pressure	0.5～0.6 Mpa
Speed	3000 pcs-hr (50 mm)
Cut length of wire	Cable length 28～90 mm (PVC length shortest 23mm)
Stripping length	Front end side 0~10mm; Rear end side 0~7mm
Capacity	Cutting wire, stripping on one end, stripping both ends, half-stripping on one end, half-stripping both ends, twister on one end , twister both ends, on one end tin dipping, both ends tin dipping
Detectors equipped	Without wires,wire joint, , wire overload, air presser low
Dimensions	2,000 L×1,200 W×1,300 H mm
Weight	Approx.420 Kgs

Prev Next